Thursday, March 19, 2015

March 2, 2015 Free Fall Lab

Objective: Determine the acceleration of a free fall body is 9.8m/s^2 under no external force except gravity.
The Set-Up:
The Spark Generator
The apparatus for this experiment is the spark generator. The spark generator has a cylinder on the top, when the spark generator is turned on, the cylinder falls, as it falls, it leaves mark every 1/60th second. A long strip of paper is attach to the spark generator to record the spark that the spark generator generates.

Data Collection: 
The strip of paper with spark marks

For convenient reason, we are given the strip that already had spark marks on it. We measure the marks on the strip using meter stick, we measure with the unit of centimeter. This is our data.

Mark No.
Distance (cm)
1
1.4
2
3.1
3
4.9
4
7
5
9.3
6
11.9
7
14.7
8
17.8
9
21.3
10
24.9
11
28.8
12
33
13
37.5
14
42.2
15
27.2
16
52.4
17
58
18
63.8
19
68.7
20
76.1
21
82.6

Each mark represent 1/60th second. We input the data into the Microsoft Excel spread sheet. 




After we find the distance between each spark on the paper, 1/60th second apart, we input the formula into the spread sheet. Then we get a third column that has the distance per 1/60th second. This third column is the difference of distance.

Next, we make the fourth column titled "mid-interval time" by taking the original time plus 1/120. This gives the time for the middle of each 1/60 interval. Lastly, we produce the fifth column called "mid-interval speed" by diving the change in distance (∆x) by (∆t), 1/60 s.

We use the data to make two graphs. The first one is Mid-Interval Time vs Mid-Interval Speed and the other is Time vs Position graph.

Velocity/Time graph


position/ time graph

Questions/ Analysis:
1. Show that, for constant acceleration, the velocity in the middle of a time interval is the same as the average velocity for that time interval.

2. Describe how you can get the acceleration due to gravity from your velocity/ time graph. Compare your result with the accepted value.
The equation for the velocity/ time graph is y=939.74x+71.545. The figure 939.74x cm/sec^2 is the slope of this graph, which the acceleration, in this case, it is the gravity. 939.74 is measure in centimeter per second squared, when it is convert to meter, we get 9.4 m/sec^2. This is 5% less from the true value of gravity, 9.8 m/sec^2.
3. Describe how you can get the acceleration due to gravity from your position/ time graph. Compare your result with the accepted value.
The equation for the position/ time graph is y= 474.14x^2 + 69.661x +0.1514. When we take the derivative, we get y= 948.28x + 69.661. The gravity value we get is 948.28 cm/sec^2, which equals to 9.5 m/sec^2. This value is about 3 % less from the true value of gravity, 9.8 m/sec^2

Conclusions:
Assumptions of this lab
1. No friction (If there was friction, it would make the values smaller)
2. The sparks are exactly 1/60th second apart

Errors and Uncertainty



Toward the end of the lab, we take the gravity value from each group and analyze them. We make a excel spreadsheet to show the deviation from the mean. The way to get the deviation from the mean is by find the difference between the experimental values and the mean value. Squared the value and add every values together. Divide the sum of squared deviations by the number of data you have, in our case is 9. Then you take the square root of this number. Our standard deviation of the mean is 20.1.

According to the experimental data, the gravity is between 916cm/s^2-996cm/s^2, this is not a good experiment to find out the true value of gravity.

1.What pattern is there in the values of our values of g?
Our values of gravity are 9.4 m/s^2 and 9.5 m/s^2. The pattern is that they are close to each other.
2. How does our average value compare with the accepted values of g?
Our average value is 9.56 m/s^2, it is lower than the accepted value of gravity, 9.8 m/s^2.
3. What pattern is there in the class' values of g?
Class' values of gravity are smaller than the actual value of gravity.
4. What might account with any difference  between the average value of your measurements and those of the class? Which of these are systematic errors? Which are random errors?
5. Write a paragraph summarizing the point of this part of the lab. What were the key ideas? What were you supposed to get out of?
This experiment has a system error which reflects in the class's average value of gravity to be lower than 9.81. This system error is the assumptions that we make for the spark generator. We assume that there is no friction nor air resistance. They are system error because no matter how careful our measurement or calculation is, the values are always going to be inaccurate, the problem is the whole system, not individual technique.
The random error is reflect on individual technique. The gravity value of my group is 9.4 m/s^2. This value is toward the lower end of the class data. It might due to the technique of the operator who made the strip, it might be because of the condition of the spark generator at that moment, it might be we made some small mistake when measuring the marks. These factors are random, thus they are called random error. 



Wednesday, March 18, 2015

March 11, 2015 Fall of an Object and Air Resistance Lab

Objective:
To find the relationship between the air resistance force and the speed of a falling object.

The Set-Up:
The photo of the balcony taken on the ground level

In Mt.SAC, building 13, the technology building, there is an indoor balcony. The advantage of indoor is that there is less unexpected force, such as wind, that could greatly affect our experiment. According to the instruction, some people stand on the balcony and drop the coffee filter. The way to drop the coffee filter is to hold it with two palms, and drop it gently, we want to make sure the coffee filter is stable while lowering.

Brown and white coffee filters
Our group choose the brown coffee filter to be the object because it is more visible than the white. We begin by lowering one coffee filter, we record by using video from the laptop, then we use loggerpro to help us analyze different points when the coffee filter is falling. We use a meter stick as a reference point for loggerpro. After we record the falling of one coffee filter, we add one more and did a recording with two coffee filters. We repeat the process until we have the video of five coffee filters falling.

Data Collection:
Velocity vs Time graph for 5 coffee filters
After recording five videos, we use loggerpro to analyze the videos. The results we get are five velocity vs time graph. The many dots on the graph represent different position of the coffee filter at different time. We choose the dots that are toward the end to analyze because they we are trying to find the terminal velocity and they are the ones that seems more consistent.  We use the linear fit option and get the slope of the graph; the slope is the terminal velocity.

Number of coffee filter (s)
Terminal Velocity (m/s)
1
0.9762
2
1.314
3
1.421
4
1.713
5
1.828

Next, we begin our calculation with an equation representing the air resistant force.
F= K * V^n
A few things to highlight of this equation:
·        ** The air resistant force (F) and v (terminal velocity) are proportional just like in the data table, the number of coffee filter is proportional to the terminal velocity
·         **The data from the table is a curved graph, it must involve some kind of exponent, therefore, in the equation v is to a power of n
·         **K represents a certain shape function

We can determine the values for k and n by plotting the data.
Distance and velocity graph

K=0.008846
n=2.678
Finally, we gather all the pieces of information and make a model according to Newton’s Second Law, F=ma.

Since this differential equation would be difficult to solve, we are going to use excel spreadsheet.

First we make eight columns and named them as t, delta v, v, a, delta x, and x. We set the time very small, such as 0.01 second so we can get a more accurate result.Under delta v, we input the formula, a1* delta t, because the acceleration times the change in time gives you the change in velocity. This change in velocity plus the initial velocity give you the final velocity, which is v. Next, gravity (9.8)- k/m* v^n gives us acceleration. The change in position is the average velocity times time. Lastly, final position is the sum of the initial positon and change in position.

Our goal is to look for a velocity when it becomes constant. This constant velocity is the terminal velocity of our experiment. 

Conclusion:

The excel that we use to derive the constant velocity

The terminal velocity is 1.842 m/s. This spreadsheet is calculated based on the mass of five coffee filters

Our experimental value of five coffee filters is 1.828 m/s, which is not far from our data!

The reason for this discrepancy might due to that fact that there is some other forces beside air resistance and gravity, such as when someone walks by or when someone opens the door, there could some random wind flowing around, which could affect the velocity. Other human caused errors could be the way we drop the coffee filter, though we try our best to keep it stable, the coffee filter could still fall on a random shape, which could influence the shape constant (K). Lastly, when we plot the point, we takes out a point, the velocity of three coffee filters, 1.421 m/s, because it is greatly out of the way. If we keep the third point, it could drastically change our result.

The graph with the third point that we taken out






Saturday, March 14, 2015

March 9, 2015 Propagated Uncertainty in Measurement Lab

Objective: Be familiar with the process of calculating the uncertainty in measurements.

Part 1

Copper (left), Lead (middle), and Silver (right)

In order to get a more accurate measured result, we find the uncertainty by looking at each measurements. In our case today, in order to find the uncertainty in density for each of the cylinder, we need to analyze the mass, the height and the diameter. We use the method of partial derivative to help analyze the uncertainty in each measurement.

Here we have three metal cylinders, we want to calculate their densities and uncertainties. We begin by writing out the volume equation for cylinder:

V= π (d/2)^2h

The volume is for finding the density, which is mass divide by volume. Therefore, when we put both equation together for the density of the cylinder, we have:

Density = m/v=m/[Ï€ * (d/2)^2 * h]

The three measurements that we are trying to find the uncertainty are mass, diameter and heights. We firstly use caliper to measure the diameter and height and then use the balance to measure the mass. 

A caliper

Using caliper to measure the height

Using caliper to measure the diameter

The following are the measurements we get.

Aluminum
Steel
Copper
Mass
21.0 g
73.9 g
56.6 g
Height
4.86 cm
4.78 cm
5.01 cm
Diameter
1.43 cm
1.51 cm
1.25 cm

Then we use partial derivative to calculate the uncertainty.


This is the calculation for aluminum. But the general set up are the same for the rest of the cylinders. We begin the partial derivative process by finding the measurements that need to be partial derived (red box). Then we find the partial derivative for each measurement (green box). This is the same for all three cylinders because they have the same shape, the difference is the magnitude of each measurements. After calculating all three measurements, we multiply them by their uncertainty in measurement (purple box). The mass has an uncertainty value of 0.1 g found by looking at the balance. The diameter and heights both have an uncertainty value of 0.01 cm, found by looking at the caliper. Next, multiply the partial derivative of each measurements by its uncertainty value accordingly. For example, the partial derivative of mass would multiply the uncertainty value of mass. After we multiply and add them together, we get a small value relative to the density, this value is our uncertainty in density. Lastly, putting together the calculated density of the cylinder and the uncertainty value of density for the cylinder, we got a range of density between 2.7459 g/cm^3~2.6341 g/cm^3.  The density of aluminum is 2.7 g/cm^3, it is within our range!

Since the calculation works the same for all three cylinders. Here is the result and its true density.

Calculated Density and density Uncertainty (g/cm^3)
True Density (g/cm^3)
Aluminum
2.60±0.0559
2.70
Steel
8.63±0.144
7.75-8.05
Copper
9.206±1.82
8.96

Part 2

Two stations with unknown mass are set up like the picture above. The tension force on the two wires and the angles can be measure. Our job is to find the weight of the unknown mass, the red bottle, and the uncertainty in the mass.

General calculation of the set up
We approach the problem by drawing a free body diagram (please refers to the red box).  Then we calculate the force in the x and y direction. The forces in the x direction is travail, it is not vital to our goal of finding the mass. We find the mass by looking at the forces on y. After we have an equation for finding mass, we write out a general equation for partial derivative of force 1, force 2, angle 1, and angle 2, with respect to mass. Then we determine the equation of partial derivative using the equation of mass. This is still a general set up since we have not insert any actual value yet.

The calculation for set-up #1
 Here we have set-up #1 calculation, we simply follow the step. One thing that must pay attention is the uncertainty value because the uncertainty value changes when using different measuring equipment. In this case, we use two spring scales that has an uncertainty value of 1 N, we also use a measuring device for angle, the measuring device is 2 degree apart, that means the uncertainty value for the angle is 2. When calculating, one must remember to change the degree to radian because calculus works in radian, not degree.  Lastly, we have an uncertainty value for mass, we put it together with the mass. Then we have the mass with its uncertainty value!

We repeat the same process for set-up#2.

The calculation for set-up #2

Here we have set-up #2, the forces and angles are different; however, the calculation process is still the same. One thing need to pay attention is that the uncertainty value for the force. The uncertainty value of force is 0.5 N, it is different from set-up #1 because we use different kinds of spring scale. Just as in set-up #1, we multiply the partial derivative with the uncertainty value, then we add them up. Eventually we get an uncertainty value of mass.

Results:
Set-up #1: 0.95 kg± 0.1656 kg

Set-up #2: 0.60 kg±0.14 kg

Summary: 

In this lab, we are trying to find the uncertainty value of a measured object. In part 1, we begin by finding the density of three metal cylinders. We measure their heights, diameters and mass. We come up with an equation describing the relationship between the measurements. We then take the partial derivative of these three measurements. The reason we use partial derivative is that when we take the partial derivative, we find out how the mass is being affect when that particular measurement is changing. After we have partial derivative of all three measurements, we multiply them by the uncertainty value of the measuring device. Lastly we add the product of all three partial derivatives and their uncertainty values. Then we get the uncertainty value of the density.

In part 2, we are trying to find out the mass of the unknown object and its uncertainty value in mass. We have a red bottle hanging on two wires. The wires has tension in it, we take down the measurements. The wires also make two angles with the mass, we measure the angles as well. After having all the data, we draw a free body diagram, sum up the forces on x and y direction, then we find the equation for mass. The equation of mass is use to find the partial derivative of each measurements- force 1, force 2, angle 1, angle 2. Then we multiply the partial derivative with its corresponding uncertainty value. Note that the uncertainty value of force is different in each set up because we use different kind of spring scale. Lastly we have a mass and its uncertainty value!








Sunday, March 8, 2015

March 04, 2015 Non-Constant Acceleration Problem

Purpose:
To solve an integration problem using microsoft excel by following a certain logic and inputting corresponding formulas.

Problem:

We may solve this problem by integration. Which is shown below with detailed steps. The strategy is firstly to find the acceleration of the elephant/rocket system. Secondly, use a(t) to find v(t) by integration. In the same way, use v(t) to find x(t) by integration. Finally, find the time it takes for the elephant to stop then plug the time into x(t) to get the distance. The distance is 248.7 m.



OR

This is not all, this is just a sample of the spreadsheet 
We can use excel spread sheet to come up with the same distance.
1.) Take 8 columns and named them as the following: t (time), a(acceleration), a_avg (average acceleration), ∆v (change in velocity), v (velocity), v_avg (average velocity), ∆x (change in distance) and x (distance).
2.) Set the time increments by 0.1 seconds for many rows. We began with time because all the other components depends on time.
3.) Input the formula for acceleration column. The formula is the function of acceleration with respects to time, which is a(t)= -400/(325-t).
4.) After getting the acceleration for each time increment, find the average of the acceleration in the next column. The reason we find average acceleration is that average acceleration times time results in the change in velocity.
5.)  For the change in velocity column, multiply the average acceleration by time. The change in velocity helps us to find the final velocity of that time increment. The final velocity is the initial velocity plus the change in velocity.
6.) We form the velocity column by adding the every velocity, starting with the initial velocity of 25m/s, to the change in velocity.
7.) Then we take the average of the velocity column. The average velocity is needed to find the change in distance.
8.) The final distance is the sum of the change in distance


To find the distance when the elephant stops, find the time when it stops from the integration calculation, which is 19.7 seconds, then look at the distance at the end of the row, which is 248.929 m.

Conclusion:
1. The distance we get from doing integration by hand is 248.7 m while the distance from the excel spreadsheet is 248.9 m. The reason for the difference in the final distance is because the integration by hand uses infinite amount of rectangles while the excel spread sheets with time increment 0.1 uses only 200 increments (rectangles). 
2. When the figures in the average acceleration column does not seem to change much, then you know you have the right increment of time. This is because when we use a larger time increment such as 1 second, the average acceleration graph is a curved line, we cannot integrate. However, when we use smaller time increment such as 0.1 second, then we break the same curve into smaller piece, which now we can look at them as little straight line for integration.






 



Sunday, March 1, 2015

Feb. 25, 2015 Inertial Balance Lab

Objective: Finding a set of equations describing the behavior of the pendulum

The Set-up:
We secure the inertial balance to the table using a C-clamp. We put a thin strip of tape to the end of the inertial balance. Then we set a photogate positioned in front of the inertial balance. The distance between the inertial balance and photogate is where the tape could be detected when the inertial balance begins to oscillate. Then we connect the photogate to the loggerpro on the laptop.


Data Collection:
We collect the data by measuring the period of different masses. We begin by measuring the period of the balance without any mass, then gradually increase the mass by 100g until we reach 800g. The data is show in the table below.
Mass in balance (g)
Period (sec.)
Mass in balance (g)
Period (sec.)
0
0.284
500
0.549
100
0.35
600
0.594
200
0.407
700
0.641
300
0.456
800
0.683
400
0.503




Next, we use the same method to collect the data from two random items. The items we choose are a wallet and a calculator.
Items
Period (sec.)
Wallet
0.454
Calculator
0.369

We purposely did not measure the masses of the two items because we will be using them to check our equations later on. 

Then we begin to formulate the equations. We first consider the equation:
T=A*(M) ^n
The M here not only refers to the mass we add but also the mass of the balance tray itself. Therefore, a more accurate equation would be:
T=A(M added+ M tray)^n
There are three unknowns here, they are A, M tray and n.

We guess the value of the M tray and input the data from the first data collection. The result is a curved graph. We need to continue to guess on the mass of the tray until we get a straight line, the straighter the line is, the more accurate the value of M tray becomes. 


We linearize the curve by taking the natural log of the equation, we get:
ln(T) = n* ln (M added + M tray) + ln A.
Not that this equation is very similar to slope intercept form: y=mx+b. We plot the equation by setting the x- axis to be ln(M added+ M tray) and the y-axis to be ln T. We linear fit the graph by maneuvering the parameter.   

Then we get this, it shows the A and n for our linearized equation.

This is the linearized graph for the high value of M tray

Now we have the value for both A and n. We still need a more accurate value for M tray since the M tray value we use is a guess and it has a correlation value of 0.9994. 

Next, we begin to find a range of value for the mass of the tray. Our goal here is to get the correlation value as close to 0.9999 as we can.

We find the range of the M tray to be 0.3 kg - 0.349 kg. We use this range and the data of the slope (m) and y-intercept (b) on the graph to find the two equations that uses the low and high value of the tray.


This is the format for the equations

We formulate the two equations, one for low and one for high, and we test the equations by calculating the mass of the two items that we choose earlier. 

The calculations show that whether using the high or low equation, the mass of same object remain close to one another. Since the results are not too far from one another, our equations are close to the actual behavior of the inertial balance.

Summary: 
The purpose of inertial balance lab is to find the relationship between the mass and period of the inertial balance. After setting up the balance, photogate, and loggerpro, we collect the data by measuring the period of the balance with various masses. Then we measure the period of two items with unknown mass. We begin the formulation of the equations with T= A(M added +M tray)^n. We take the natural log of both sides to linearize the equation, in order to find A and n. After we have the value for A and n, we input different value for the M tray until we get a correlation value at 0.9999. We then use the range of the M tray to write the two equations, one for the lowest value of M tray (0.3 kg) and one for the highest value of the M tray (0.349 kg). After finding the two equations for the period of the balance, we uses the periods of the two objects with unknown mass to test our equations. The result is that the mass for the same object is close to each other whether we use the high or low equation. This shows that we have successfully coming up with a set of equations describing the behavior of the pendulum!